Pachislo Coin Jam Prevention and Solutions
Square Plastic Brown or Black Coin Mechanism
1. Switch machine off.
2. Eliminate the base coin safeguard. Now and again the square earthy colored coin systems have coin safeguards that are pivoted – simply bring down the coin safeguard. The dark forms have removable coin safeguards. Press in on the left 메이저놀이터right to eliminate.
3. The coin way is covered by a spring stacked region. Look carefully and you can without much of a stretch see the spring in the photograph. Pull the spring stacked region up – it really goes up and to the upper right.
4. Clear the coin with your finger.
Assuming the coin is caught in the acceptor on the facade of the machine and you can see it, give pulling a shot of the front. On the off chance that it is stopped where you either can’t see it or can’t eliminate it, pull open the spring stacked region and put in one more token and push it UP to push oust the coin and get it up through the front. Walk out on and reset if necessary.
The more extended metal variants work the same way and will likewise have a spring stacked front.
Forestalling Coin Jams
Most coin jams are not the consequence of issues with your machine but rather of tokens and soil.
Practically all Pachislos acknowledge .984″ tokens in particular. In spite of the fact that your tokens might have all the earmarks of being a similar size, a slight variety long or width might be sufficient to cause coin jams.
Coin components can turn out to be VERY messy after some time. This made the tokens move gradually through the coin way and become trapped in the coin component or the coin chute and never fall into the container. Follow these moves toward forestall future coin jams:
1. Check for Magnetic Tokens
Before you use tokens in your machine run a magnet over them and eliminate any attractive tokens. Many machines will throw out or stick attractive tokens and afterward send a mistake code.
2. Really take a look at Token Sizes
Most Pashiclos just acknowledge .984″ tokens. Your tokens might seem, by all accounts, to be all indistinguishable is size, however your machine might be particular. Anything other than.984″ will become stuck. Put the tokens in little stacks and check whether any are marginally bigger or thicker than the others and eliminate them.
3. Clean the Tokens
Use Kaboom more clean. Blend a little in a pail of warm water. Drop your tokens in and blend them for a couple of moments. Flush them and dry them prior to utilizing. In the event that you utilize your machine frequently do this like clockwork or so to forestall soil development in the coin system, coin way and container.
4. Clean the Mechanism
It is easy to Remove the system. Turn off and eliminate it and clean it well with a moist disposable cloth, lifting the spring stacked region and cleaning there too. In the event that the metal coin way is rusting utilize a sharp blade, screwdriver or exacto blade to eliminate however much rust as could be expected and clean the rust with a wipe. At the point when you are done provide the way with a VERY SMALL spurt of silicone splash, clearing off any overabundance.
5. Clean the Coin Chute and the Coin Acceptor
While the coin system is out, clean the external coin acceptor where the coins enter the machine. On the off chance that you have moist disposable clothes take a stab at utilizing a meager blade to push a moist disposable cloth delicately into the coin acceptor from an external perspective of the machine and hauling it out the opposite side to clean within. At the point when you are fulfilled splash one spurt of silicone shower into the coin acceptor, clearing off any abundance silicone.
Clean the coin chute also (this what brings the tokens from the coin component to the container) and anything you can arrive at in the container.